Five trigger buttons in different colours, seen from above

Remote Camera Trigger Button

25 cm (9.8 in) / Right angle (90°)
$32.00
Skip to product information
Five trigger buttons in different colours, seen from above
  • Five trigger buttons in different colours, seen from above
  • Five trigger buttons in a row in different colours
  • Trigger buttons lined up on a table in different colours
  • Close-up of the pink and purple trigger buttons
  • Pressing the trigger button fires the camera through a PocketWizard
  • Trigger button on a lens, plugged into a PocketWizard on the camera
  • Trigger button on a 70-200 lens with the cord running to the camera
  • Close-up of the trigger button on the lens with its rubber band
  • Remote camera trigger button with its cord and 3.5 mm plug
  • Close-up of the trigger button
  • Trigger button with its full cord
  • Trigger buttons in black, blue, pink, purple and yellow
  • Five trigger buttons grouped together, seen from above
  • Five trigger buttons in different colours, seen from above
  • Five trigger buttons in a row in different colours
  • Trigger buttons lined up on a table in different colours
  • Close-up of the pink and purple trigger buttons
  • Pressing the trigger button fires the camera through a PocketWizard
  • Trigger button on a lens, plugged into a PocketWizard on the camera
  • Trigger button on a 70-200 lens with the cord running to the camera
  • Close-up of the trigger button on the lens with its rubber band
  • Remote camera trigger button with its cord and 3.5 mm plug
  • Close-up of the trigger button
  • Trigger button with its full cord
  • Trigger buttons in black, blue, pink, purple and yellow
  • Five trigger buttons grouped together, seen from above
Remote Camera Trigger Button

Remote Camera Trigger Button

$32.00
Cord length
Plug

This trigger button goes on your lens and plugs into a transmitter, like a PocketWizard, so you can fire your remotes from the camera in your hands.

The button rides on a #94 rubber band (3-1/2 x 3/4 in) that fits most lenses from 12 to 200 mm, so you can put it wherever it sits best on each lens.

The switch is a light linear key (Kailh Choc, about 50 gf) that fires at 1.5 mm. A raised rim around the key helps stop accidental fires when you grab the lens.

The cord comes in two lengths, 25 cm (9.8 in) or 1 m (3 ft), with a 3.5 mm (1/8 in) mono plug. Pick a right-angle (90°) plug, or a straight plug while they last. Each one is hand-assembled and tested.

Parts

The button, housing and base are printed separately, so you can pick a different colour for each.

In the box
  • Trigger button with your choice of cord and plug
  • #94 rubber band
Specs
Switch Kailh Choc linear, ~50 gf, 1.5 mm to fire
Plug 3.5 mm (1/8 in) TS mono, right angle (90°) or straight
Cord 25 cm (9.8 in) or 1 m (3 ft)
Mount #94 rubber band (3-1/2 x 3/4 in), one included
Lens fit Most 12-200 mm lenses
Button, housing, base PETG
Lens pads TPU
Mounting
  1. Slip the band into the channel under the button.
  2. Roll the button and band onto the lens.
  3. Plug into the transmitter and test-fire.
Q&A

Q: Will it work with my transmitter?
A: Yes, if it has a 3.5 mm (1/8 in) mono trigger input.

Q: What if the band wears out?
A: Any #94 rubber band (3-1/2 x 3/4 in) works.

You may also like