Spare Feet for The Slab

$5.00

Spare or extra screw-in feet for The Slab, sold as a pair. Pick standard feet for level shots and low angles up to about 13°, or long feet to aim higher, from about 12° up to 24.4°.

Both screw into the same holes at the front of the plate, so you can swap them any time. Printed to order in the colour you pick.

Ordering 2 or more Slabs? Skip these. Each Slab comes with standard and long feet, and the long feet are free. Pick Standard + long on The Slab.

Angles with standard feet

Angles with long feet

Standard or long

	Standard	Long
Tilt	0° (feet out), ~2° to ~13°	~12° to 24.4°
Best for	Level and low angles	Aiming higher
Per full turn	About 0.8°	About 0.7°
Length	7 mm foot, sticks up about 31 mm when screwed in	91 mm: 84 mm threaded rod and 7 mm foot
Price	$5 a pair	$8 a pair

Long feet angles

Turns out	Tilt	Rod above the plate
12.4	12.2°	42 mm
16	15.0°	33 mm
20	17.9°	23 mm
24	20.8°	13 mm
28	23.6°	3 mm
29.2 (maximum)	24.4°	0 mm

Below about 12°, use the standard feet, because the long rods stand 42-73 mm above the plate there.

Good to know

Lens clearance: the long rods leave about 95 mm between them, so a wider lens or hood over the front corners can touch them.
Balance: at full tilt on long feet, a tall ball head with a short lens can tip backward.
Knocks: the rods are plastic and extend furthest at full tilt, so keep them clear of kicks and foot traffic.

Angles are for a camera mounted straight on the plate. On a ball head, the head sets the angle.